Hitting the outlined targets for harvesting corn intended for silage can offer dividends through exceptional feed over the next year.
“There are two reasons we are interested in dry matter (or moisture) of freshly chopped whole-plant corn intended for silage,” explains Dr. John Goeser, animal nutrition, research and innovation director for Rock River Laboratory. “Fermentation characteristics and crop maturity; assuming that dry matter correlates to kernel maturity.” Goeser recommends reviewing university guidelines for ideal dry matter levels, dependent on storage type for you or your customer’s farms but offers a general guideline of 35% dry matter (65% moisture). “Realizing that chopping can take some time, it’s best to begin the harvest just before you reach the dry-matter target. Continue chopping beyond the target and realize an average dry matter that is right around the ideal level.”
As growers, nutritionists, and agronomists prepare and assess the maturity of corn that may require an earlier harvest than normal, Goeser offers a few additional considerations and targets to achieve a good fermentation ahead, and great feed to get through the next year:
1) Monitor crop maturity aggressively
Goeser recommends taking the time to monitor crop maturity regularly as the chopping season looms. In addition to dry matter measurement, milk line and kernel maturity review can also be utilized to gauge crop progress, but moisture is still a strong component when it comes to fermentation characteristic assessment. “The opportunity for failure, or for challenges to arise, is far greater when we aim for dryer and more mature thresholds,” explains Goeser. “It will be harder to pack and ferment at those dryer levels. If we experience a dry spell with 80-degree [F] days and wind for a week, corn can go from drying out a point a day to losing several points of dry matter per day, leading to a fluffier crop [when harvested] that has kernels that are harder to process, among other detriments to the goal of an optimal feed.”
2) Include data from the InField Updates* tool in your decision to chop
“Fiber and starch data provide direction as to the energy content per pound that the crop is going to have,” explains Goeser. “We should shoot for more starch and less fiber, considering fiber is the least digestible nutrient out there, but it has to be balanced against dry matter. NDF and starch determine potential nutritive quality, so I recommend less than 40 percent NDF. Hitting this target usually ensures starch greater than 32 to 35 percent.”
InField Updates is a free, crowdsourced in-app tool from Rock River Laboratory that offers timely fresh Dry Matter (DM), Neutral Detergent Fiber (NDF), and Starch statistics, on a map, to determine the optimal harvest timeline of corn intended for silage. “Check InField Updates daily during chopping season to track moisture levels and the fiber to starch ratio in your area,” suggests Goeser. “The data provided can be used as a comparison but also help dial in your chopping timeline.” Download the FeedScan app and click on ‘InField Updates’* to try out this tool.
3) Consider high cutting experiments on you or your clients’ farms
“Many areas experienced plenty of heat and moisture early in the growing season this year, so I’m forecasting fiber digestibility and stover characteristics to be more ‘woody’ this year,” observes Goeser. “These characteristics can be varied with cutting height.”
“Two things will change with high cutting,” says Goeser. “First, fiber to starch ratio because of more grain with less stover, and secondly, NDFD. The fiber portion at the top of the plant is more digestible than the lower section, so NDFD can be substantially improved by leaving the woodier portion in the field.”
4) Utilize KPS when you start chopping and throughout the harvest
Reviewing Kernel Processing Score (KPS) regularly throughout the harvest can help ensure kernel processing is up to par for optimal digestion, but frequency is up to the grower and their consultants. “It’s one thing to have your equipment ready for the season, but changes happen in equipment and crop status which affect KPS. Processing can be monitored by checking KPS once a day or even every couple of days,” suggests Goeser. “These samples can be sent to the lab for KPS analysis to check fields and keep the equipment processing correctly. Understand that the KPS benchmark is lower for unfermented, fresh chop whole plant corn, relative to what it will be six months into fermentation,” advises Goeser. “Fresh chopped corn KPS will improve as the fermentation process breaks down starch and the kernel more as time goes on. Thus, the fresh chopped corn KPS goal is around 60 to 65, while fermented silage should be 75 or better”.
To generally assess KPS without a lab, a simple float test can be performed. Drop one pound of chopped corn into a bucket of water. The stover and leaves will float, with the crushed kernels ending in the bottom. Rinse the kernels through a screen to then assess visually. The recommended state after processing is complete kernel destruction.
Through careful assessment and utilizing the data available, nutritionists, agronomists and the growers they advise can optimize the chopping timeline. Goeser shares, “Spending a short time now to dial in a balance of moisture level and nutritive qualities, and harvesting at that appropriate time will pay back dividends in the form of an exceptional feed for the next 12 to 14 months.”
Founded in 1976, Rock River Laboratory is a family-owned laboratory network that provides production assistance to the agricultural industry through the use of advanced diagnostic systems, progressive techniques, and research-supported analyses. Employing a team of top specialists in their respective fields, Rock River Laboratory provides accurate, cost-effective, and timely analytical results to customers worldwide, while featuring unsurpassed customer service.